| Machine Station | Forming, cutting |
| Mechanical Arm | Punching and stacking |
| Max Formed Area | 1200*1000 (mm2) |
| Max Formed Depth | 280-340mm (adjustable) |
| Sheet Width | 800-1200mm |
| Roll Diameter | 800mm |
| Sheet Thickness | 0.2-2.0mm |
| Cycle Per Minute | 8-12 molds/min |
| Air Pressure | 0.6-0.8wpa（3m³/min） |
| Suitable Material | PP/PVC/PS/PET/HIPS |
| Power Consumption | 48KW/Hr |
| Engine Power | ≤210KW |
| Cutting Mode | automatic cutting inside mold |
| Stretching Mode | Servo ( 11KW VAXtron servo motor) |
| Ball crew | TBI Taiwan |
| Total Weight | 6000kg |
| Rack | Square steel(100*100) |
| Dimensions | L5500*W1800*H2800 |
| Power Supply | 380v/50Hz 3 phase 4 lines GB copper wire 90 ㎡ |
- 55 tons of hydraulic system. Motor power with 15 levels. Hydraulic valve all made by YUKEN Japan.
- Plastic flower pot making machine mechanical Arm: 1)Horizontal arm and vertical arm use 2KW servo motor; Driven with double shaft synchronous belt. 2)Slide of Taiwan brand; 3)Aluminum material;
- The frame adopts 160*80, 100*100 square pipe welding.
- Cast iron working table, constant type and strong impact shear force. Four columns using 45# forgings heat treatment chrome plating of diameter 75mm.
- Flower pot making machine delivered by chain using 3KW Vtron and RV110 reducer.
- The method of mold: using four guide column to control the accuracy of both sides. The diameter is 100mm; Material used is 45# chromeplate.